Mother Load Locator

Complete Operators Manual
Rugged Seal Tight Case
12-Volt Rechargeable Sealed Battery
Analog Meter
One Year Warranty
Closer View of Mother Load Locator
       

Specifications
Weight

Approx
35 lbs

Depth

Up to
130 feet


MADE IN
THE USA


Price

Only
$2,995.00
$60 Shipping
in the USA



To have
specific
questions
answered
about the
Mother Load
Locator



When a strong low frequency signal is transmitted through the ground from one probe to another, the wave used is a "carrier." The Mother Load Locator has a special low frequency wave that travels great distances in the ground. The wave will take the path of least resistance through the ground. Precious metals are easy for the wave to travel through. If metal or a highly conductive target is in the wave's trajectory, it encounters less resistance along its path. A stronger carrier wave will return to the receiving probe. When this happens the Target Response Lamp on the Mother Load Locator lights. A metered response will also be indicated on the control panel of the MLL. Using this technology, many discoveries have been made in Greece, Mexico, the Philippines and right here in the USA
Covers 24,000 square feet,
approximately 1/2 acre

Determines size, shape
and depth to 130 feet

User friendly, one switch
for 6-way testing

Extra large meter for easy reading

4 - copper plated rods

4 - 110 ft wire spools

Battery, charger & connectors

Dummy loads

Now you can see what is
buried before digging!

Locate Treasures, Gold Veins, Caves

Find what the old timers missed. In many cases they missed large deposits of gold or silver just a few feet from where they worked. Many treasures have been walked away from in the same manner. Now come back to these locations and cash in. The Mother Load Locator is a proven instrument based upon today's technology. Looking for a Deep Cache? Are you trying to locate deeply buried coins or bullion? Looking for Spanish gold bars or buried treasure? Or perhaps you are a prospector trying to locate a placer pay streak, abandoned tunnel or cave?

The Mother Load Locator is used by treasure hunters to "electronically" locate gold, silver, copper, and brass hoards. Prospectors have been using the unit for identifying the changes in soil conductivity, all with great success

Measuring resistivity, engineers under our direction have perfected a method of using special electronic charging waves that charge the ground and measure the returning resistivity of the wave. It is similar to a standard metal detector, except with a metal detector you are limited to the size of the search coil, with very little depth and area coverage.

With the Mother Load Locator a signal is sent out to look for targets as deep as 130 feet. Imagine the amount of time you save and the ground you can cover!

Mother Load Locator

The concept behind which the MLL was developed is the use of FERF's, or Free Electron Radiation Fields. All buried precious metals suffer a slight deterioration due to acid rain, snow and other chemicals. When acid and ultra high radiation contacts metals, a free electron radiation field is created. The longer an object is buried the stronger the field. When the MLL sends a Carrier Wave into the ground it sinks and disperses. It finds the radiation field surrounding the precious metal and will automatically tune to it. The MLL measures the return between various points with the ground probes. As a drop in resistivity is noted or certain readings in the gold or silver ranges are noted, the Mother Load Locator will find the target. After a target has been pinpointed, its depth can be determined with the Mother Load Locator. This is done by moving the ground probes closer to each other, the meter readings will continue to get lower. Depth is approximately half of the distance where the lowest reading occurred. Through positioning of probes and meter readings, the MLL will also determine the size and shape of targets.

How the Mother Load Locator Works

The Mother Load Locator requires no special permits to operate. It does not use explosives or chemicals like other systems. The MLL finds nonferrous metals and will locate tunnels or abandoned mines. The unit is portable, approximately 35 pounds, and is sealed in a heavy duty water tight carrying case. It can be set up quickly, probes driven in the ground and connecting wires run in a matter of minutes. The MLL is powered by a 12-volt rechargeable sealed battery and generates a 5 amp. 20 volt signal. Both the battery and a recharging system are included with the Mother Load Locator. A Carrier Wave signal is sent between the ground rods with the strength measured six different directions. This will identify conductive ground and possible targets to be recovered! If the meter has a low resistance reading, there is probably a large cache of metal present. The MLL will also locate targets in wood, iron and tin containers buried far beneath the ground